HVAC flap motor replacement

[Martin, Gary G]

Exactly the way mine acted, before replacement.

Gary

-----Original Message-----
From: Kneale Brownson [mailto:knotnook at traverse.com]
Sent: Monday, January 13, 2003 8:33 PM
To: 200q20v at audifans.com
Subject: HVAC flap motor replacement


I installed the new heater box flap control motor Friday.


The result:  instead of the heat going from really hot air to warm to the
dreaded COLD, it now drops slowly to a sort of tepid air coming out, but not
cold.  HooRay.  Has worked well over the last three days, with exterior
temps from the mid-20's down to about 12 above Zero F.  I normally would get
to the COLD air stage about 30 minutes into the 35-minute drive.  Because of
traffic and blowing snow, my drives since the installation have all taken
~45 minutes.

_______________________________________________
200q20v mailing list
200q20v at audifans.com http://www.audifans.com/mailman/listinfo/200q20v

This e-mail, including attachments, is intended for the exclusive use of the
person or entity to which it is addressed and may contain confidential or
privileged information.  If the reader of this e-mail is not the intended
recipient or his or her authorized agent, the reader is hereby notified that
any dissemination, distribution or copying of this e-mail is prohibited.  If
you think that you have received this e-mail in error, please advise the
sender by reply e-mail of the error and then delete this e-mail immediately.
Thank you.  Aetna