Intake Leak Tester alternative
Matt twentyV
matt_20v at yahoo.com
Wed Jul 9 15:28:52 EDT 2003
> In use, I only got to ~ 20 psi when my dipstick
> would blow up a few inches and release the
> pressure (Note that it didn't go into any air
> traffic control zones, Brandon.)
To avoid pressurizing the crankcase (which I don't
think is normal during engine operation) you can
disconnect the crankcase breather hose at the
rear of the engine (under the IC/TB pipe) and
plug it with a wine cork.
When I ran this test I got leaking around the spark
plug holes and the oil filler cap. New VC gasket
and filler cap gasket are sitting in the garage for
a couple weeks now, guess they aren't going to
install themselves.. darn. Once the breather was
plugged, I could pressurize to 15psi and still have
a little pressure left after 1 minute. No massive
hissing so guess all is well.
Matt Rooke
'91cq//20vt (3B)
'00S4//30vtt
__________________________________
Do you Yahoo!?
SBC Yahoo! DSL - Now only $29.95 per month!
http://sbc.yahoo.com
More information about the 200q20v
mailing list