3B dist anti tamper hold down

[Bernie Benz]

> From: C1J1Miller at aol.com
>
> So, I assume that this shear bolt would be relatively easy to remove if the
> intake manifold was removed first?  I'm thinking of changing the valve cover
> gasket, etc. so pulling the intake is not that much more work, and would allow
> me to install the metal gear dist.
> Chris
Yes, with the IM removed one would have better access to this anti tamper
hold down bolt, but would still have to slot it to remove it.  Also, much
easier access for replacing the distributor.

Bernie