ECS Camber Plate install "Final"

[Bernie Benz]

IMO and by my spec, camber should have been left equal, both 0.0 preferred
or both -0.3 if necessary.

Bernie

> From: DasWolfen at aol.com
> Date: Fri, 13 Jun 2003 15:29:51 EDT
> To: 200q20v at audifans.com, v8 at audifans.com
> Subject: ECS Camber Plate install "Final"
>
> --
> [ Picked text/plain from multipart/alternative ]
> The alignment's complete and the verdict is ......drum roll..........0.0 for
> the right, and
> 0.3 neg for the left. Tramlining and wandering are completely gone. The only
> issue left with is bumpsteer under hard braking, something the owner is more
> than happy to deal with.
>
> Keith
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v