Cooland Leak

[Kneale Brownson]

Sounds like you're describing the Multifunction Temperature Sensor, which
is located a little ways closer to the firewall than the Afterrun
Temperature Sensor on the coolant manifold on the US driver side of the
engine, which I would generally call the left side of the engine.  I
presume that by right side, you are describing a position from standing in
front of the car????

If that sensor is leaking, it generally means it's failed internally, I
believe.

At 08:46 AM 06/16/2003 -0600, Lou.Martin at afscn.com wrote:
>Greetings from a new '91 200q20v owner.
>
>I've just discovered a coolant leak which occurs after completing my commute
>home from work.  Looks like it happened at least once before without me
>detecting it.  I attempted to tighten the fitting but don't have the right
>sized wrench.  The leak occurs at the larger of 2  brass/bronze hex fittings
>attached to a coolant manifold on the right side of the cylinder head.
>There are several wires (4?) connected to the bottom of the fitting.  Please
>help.
>
>LOU MARTIN
>Monument, CO
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v