[torsen] Re: 3B tranny same as MC-2 tranny?
JShadzi at aol.com
JShadzi at aol.com
Wed Mar 5 09:23:07 EST 2003
--
[ Picked text/plain from multipart/alternative ]
Don't forget totally different shift linkage in the 80/90 vs the 4kq, one of
the bigger tasks in doing the conversion, it has to be totally customized.
Javad
In a message dated 3/5/2003 5:52:11 AM Pacific Standard Time, QSHIPQ at aol.com
writes:
> For the 4kq into 80q/90q you need only the driveshaft and rear diff from a
> 4kq. All clutch components interchange, but you do need the early style
> clutch slave (pin mount -early vs bolt in mount - late). You will also
> need to accomodate the center locker, the easiest one to deal with is the
> later style gen 1 with the mount and rod above the right side axle. The
> rear diff actuation on ALL gen 1 and gen II (torsen) are interchangeable.
>
More information about the 200q20v
mailing list