[urq] Re: 3B tranny same as MC-2 tranny?

[Martin Pajak]

Scott,

>For the 200tq (89-91) you need 5ktq 016 trans, driveshaft
>(torsen housing is longer) and rear diff (5ktq is 3.89, 200 are 4.11).

You do not need a different driveshaft BTDT on Ur-q.  016 locker to 016 torsen are the same length.  Ur-q driveshaft fit both trannies no problem.

>For the 4kq into 80q/90q you need only the driveshaft and rear diff >from a 4kq.

4kq and 80q/90q both have 4:11 ratio so why would you change the rear diff????


>The input shaft is different on the non turbo 016, than the turbo 016, but I
>haven't seen a failure because of it.

The front driveshaft flanges are also different size between 4kq and 5ktq/200 016.

HTH
Martin Pajak
www.quattro.ca