Diagnostics connector pinout for VAG-COM

[Perry, Christoper (EDS)]

How about this http://www.obdii.com/connector.html

or here is a schematic for a cable that works with Uwe's software
http://www.planetfall.com/~jeff/obdii/

Am I getting closer?

Chris

-----Original Message-----
From: ben swann [mailto:benswann at comcast.net]
Sent: Tuesday, May 13, 2003 9:38 AM
To: Perry, Christoper (EDS)
Cc: 200q20v at audifans.com; quattro at audifans.com; benswann at comcast.net
Subject: Re: RE: Diagnostics connector pinout for VAG-COM


That's the idea, except I need the actual pinout.  The computer end
would be DB9 serialwhich interfaces/connects to a PC's standard Serial
(RS232) and the other end would interface to the car - the Ross-
Tech "ugly" end would work just fine, but would like to get the OBD
pinout as well.

Check out:
http://www.ross-tech.com/vag-com/interfaces.html

and you'll know what I am talking about.

Does anyone have this?

TIA

Ben





----- Original Message -----
From: "Perry, Christoper (EDS)" <chris.perry at weyerhaeuser.com>
Date: Tuesday, May 13, 2003 10:49 am
Subject: RE: Diagnostics connector pinout for VAG-COM

> Try this link
>
> http://www.sjmautotechnik.com/VAGCOM2x2.htm
>
> Chris Perry
>
> -----Original Message-----
> From: ben swann [benswann at comcast.net]
> Sent: Tuesday, May 13, 2003 6:30 AM
> To: 200q20v at audifans.com
> Cc: quattro at audifans.com
> Subject: Diagnostics connector pinout for VAG-COM
>
>
> Can someone provide me with the pinout (or link to) for the pinout for
> VAG-COM diagnostics connector(s)?  In particular for the 200Q20v which
> I assume is different than the OBD connector.
>
> TIA
>
> Ben
>