connector pinout for VAG-COM

[ben swann]

Brian,

Yes, that is part of what I need to do.  I don't plan to use the
ShadeTree as it runs on PalmPilot which I don't have.  I will obtain or
build OBD - RS-232 interface cable to use with Ross-Tech VAG-COM to run
on a PC or laptop.

Appreciate you getting that info on the 2X2 interface for me.  TIA

Ben
----- Original Message -----
From: Brian Link <BrianL at starsys.com>
Date: Tuesday, May 13, 2003 11:38 pm
Subject: connector pinout for VAG-COM
I deleted my 2x2 connectors and installed a obd2 connector when I got
the shadetree ProDiag.  Is that what you are trying to do?  If I go look
I can tell you what wires go where.  Only 4 wires needed, 2 power and 2
signal.

BRian

Date: Tue, 13 May 2003 12:37:33 -0400
From: ben swann <benswann at comcast.net>
Subject: Re: RE: Diagnostics connector pinout for VAG-COM
To: "Perry, Christoper (EDS)" <chris.perry at weyerhaeuser.com>
Cc: 200q20v at audifans.com, quattro at audifans.com, benswann at comcast.net

That's the idea, except I need the actual pinout.  The computer end
would be DB9 serialwhich interfaces/connects to a PC's standard Serial
(RS232) and the other end would interface to the car - the Ross-
Tech "ugly" end would work just fine, but would like to get the OBD
pinout as well.

Check out:
http://www.ross-tech.com/vag-com/interfaces.html

and you'll know what I am talking about.

Does anyone have this?

TIA

Ben
> Date: Tue, 13 May 2003 12:37:33 -0400
> From: ben swann <benswann at comcast.net>
> Subject: Re: RE: Diagnostics connector pinout for VAG-COM
> To: "Perry, Christoper (EDS)" <chris.perry at weyerhaeuser.com>
> Cc: 200q20v at audifans.com, quattro at audifans.com, benswann at comcast.net
>
> That's the idea, except I need the actual pinout.  The computer end
> would be DB9 serialwhich interfaces/connects to a PC's standard Serial
> (RS232) and the other end would interface to the car - the Ross-
> Tech "ugly" end would work just fine, but would like to get the OBD
> pinout as well.
>
> Check out:
> http://www.ross-tech.com/vag-com/interfaces.html
>
> and you'll know what I am talking about.
>
> Does anyone have this?
>
> TIA
>
> Ben
>
>
>
>