Noisy after Steering pump replacement in '90 90 20V

benswann at comcast.net benswann at comcast.net
Tue Sep 2 05:00:39 EDT 2003


Alan,

I had replaced the bomb at the same time, so the lines were disconnected.  I re-
used the existing lines.

Ben
> Ben,
>
> I got the humming/whining problem when I replaced the high pressure side
> power steering hose. Did you also do this when you did the pump??
>
> Alan
> ----- Original Message -----
> From: <benswann at comcast.net>
> To: <quattro at audifans.com>; <urq at audifans.com>; <200q20v at audifans.com>
> Cc: <benswann at comcast.net>
> Sent: Saturday, August 30, 2003 7:46 PM
> Subject: Noisy after Steering pump replacement in '90 90 20V
>
>
> > I recently replaced a bad steering pump that had seized in a '90 90 20V
> with a
> > rebuilt unit from one of the commonly used reputable suppliers on the
> list.
> >
> > The pump/steering system is noisy with the high pitched type of noise that
> > occurs when steering is turned full lock eminating when turning at any
> position
> > in range of travel.
> >
> > Is this a bad rebuild or is there something else to look for.  System was
> fully
> > purged and filled with new Pentosin 11S as specified.
> >
> > Ben
> > _______________________________________________
> > 200q20v mailing list

> > 200q20v at audifans.com
> > http://www.audifans.com/mailman/listinfo/200q20v
> >
>
>




More information about the 200q20v mailing list