distributor replacement best practices?

[Eric_R_Kissell at whirlpool.com]

As far an removing the anti-tamper device, I found a Dremel to be just the
ticket. I ground two flats on opposite sides of the bolt and clamped one of
my Vice Grips on the bolt. Once it was broken free, it turned easily. I
have read of others cutting a slot in the bolt and using a large flat-blade
screwdriver. I suppose you could also grid the entire head off of the bolt.

HTH,
Eric Kissell
1991 200q 20v Avant, Koni Sports (yellow), 2.4 Bar (MRC), eBay Surprise
1989 200q 10v Avant, Boge Turbogas, 1.8 Bar (qlcc) - FOR SALE
1986 5000cstq Sedan, Bilsteins, 1.8 Bar (SJM)