2076A Evaporator Box Tool Wanted

[George Sidman]

Brice:    Save your money. The tool is not needed. Just put some
masking tape on the ends of the box before you disassemble it and
draw the location of all lever arms, etc. Also, Bentley has good
pictures. The first time around this job is a bit hairy, and the
tool only complicates it. If you are opening up the box for any
reason, I recommend you replace the motor brushes and lub the
bearings so you don't have to get in there again.
-- 
George Sidman, President
Monterey Network Center, Inc.
sidman at montereynet.net
9701 Blue Larkspur Lane
Monterey, CA  93940
831 373-0145