Brakes...now after

[Kneale Brownson]

I replaced that with the shortest piece of metric line I could get at FLAPS
that came with fittings that would match the end of the OEM brake caliper
flex line and the "T" it plugs into.  Can't remember the line's length
exactly but it was 12 inches or less.  A 222 mm length would be about 10
inches.

At 11:14 AM 8/24/2004 -0400, Phil Rose wrote:

>
> From what I can see in the Family Album, the piece of line in 
>question is a section (it's item "19" in illustration 56-00) with 
>absolutely _no_ part number, but having the notation "shorten to 222 
>mm". So  I assume this section is meant to be replaced by simply 
>using some brakeline that is cut, bent and flared as required?