Euro lights

[Mike Del Tergo]

I think ordering any of the readliy available H4 harnesses (~$50) and taking 
the left over 1/2 hour to cut off the pigtail and add some female spade 
connectors to fit the euros to be the best of both worlds.  BTDT X 2 or 3
Mike

Date: Wed, 11 Feb 2004 06:57:14 -0800
From: "Wolff" <wolff at turboquattro.com>
Subject: Re: Euro lights

If you have ratcheting crimpers, understand wiring well and are good at low
voltage wiring, then 1/2 hour is reasonable, but does that include the time
to source the parts?  I think there are a fair number of people on the list
that could benefit from having the harness pre-made either due to time or
even quality. OTOH, there may be a few that would want to do it themselves
to learn in the process. I've done it both ways. I ordered the harness the
second time.
Wolff

_________________________________________________________________
Let the advanced features & services of MSN Internet Software maximize your 
online time. http://click.atdmt.com/AVE/go/onm00200363ave/direct/01/