Heater Control Valve followup

[Henry A Harper III]

The flapper motor servo is on the driver's side of the heater box under the 
plenum cover. It's easiest accessed by removing the wiper arms, then the plenum 
cover, then the little white plastic cover over it. I think those run about 
$80, I sometimes get the error codes for that but contact cleaner fixed it for 
a while and I have yet to experience consistent temperature problems. Just one 
blast of cold air in the face last winter is all.

HTH
Henry Harper
http://www.henry-harper.com hah at alumni.rice.edu
1991 200 quattro, 120k
1988 GTI 16v, 239k

On Thursday, January 15, 2004 2:28 PM, teamdaemon at comcast.net 
[SMTP:teamdaemon at comcast.net] wrote:
> So, I ordered a new valve, hose, coolant, MFTS from Scott.  Hopefuly all be
> here tomorrow, and I'll do the job on Saturday or Sunday.
>
> As a related question, getting back to the heat issue, can someone point me 
to
> where this beast is located on our cars:
> http://www.sjmautotechnik.com/AC.html#servo
>
> Would be nice to have constant heat!
>