pressure transducer swapping step-by-step?

[Richard Tanimura]

I've done it. It's a piece of cake. Desolder the 3 legs, pop in the new one.

I would help if you can tell a good solder joint from a bad one though.

Rich

-----Original Message-----
From: 200q20v-bounces at audifans.com
[mailto:200q20v-bounces at audifans.com]On Behalf Of auditude at cox.net
Sent: den 28 januari 2004 03:19
To: 200q20V mailing list
Subject: pressure transducer swapping step-by-step?


Hi,

Is there anything online as far as instructions for swapping the pressure
transducer in the
(Motronic) ECU?  It doesn't seem the actual procedure would be too
difficult, but then again
it's not something I want to take lightly.  I was thinking maybe there would
be an online
resource from someone who's BTDT?  Of course, if I'm not confident and
comfortable about
doing it I'll have a pro do it.

Thanks,

Ken



---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.571 / Virus Database: 361 - Release Date: 2004-01-26