AAN intake cam in a 3B

[Mike Sylvester]

This was a thread from a while ago, but I thought I would follow up.

When using an AAN intake cam in a 3B, the AAN cam has to be machined so you
can press on the distributor gear from the 3B cam.

Mike

----- Original Message ----- 
From: "Ned Ritchie" <Q at IntendedAcceleration.com>
To: "'Patrick Anderson'" <patrick.anderson1 at comcast.net>; "'Mike Sylvester'"
<msylvester at verizon.net>; <200q20v at audifans.com>
Sent: Friday, May 14, 2004 3:44 PM
Subject: RE: Group buy feeler post - RS2 cam


> Mike,
>
> I believe that the intake cam for the 3B and the AAN/ADU/ABY are the
> same!
>
> When the machined end of the 3B cam breaks off of the cam with the gear
> we have on several occasions put the broken cam into an AAN engine, and
> used the cam from the AAN in the 3B after pressing on the gear.
>
> There was NO CHANGE in performance in either car.
> Therefore:  I believe they are the same grind.
>
> Ned Ritchie
> www.IntendedAcceleration.com
>
>
> -----Original Message-----
> From: 200q20v-bounces at audifans.com [mailto:200q20v-bounces at audifans.com]
> On Behalf Of Mike Sylvester
> Sent: Friday, May 14, 2004 5:38 AM
> To: 200q20v at audifans.com
> Subject: RE: Group buy feeler post - RS2 cam
>
> By "cams", I assume you mean just the exhaust cam.
> The intake cam from an ADU engine is the same as from an AAN, but does
> not
> have the gear for the 3B distributor.
>
> I am not aware of anyone that has added this gear to the ADU/AAN intake
> cam.
> If anyone has, let us know.
>
> Mike Sylvester
>
>
> --  original message
> This is a VERY preliminary post just to gague interest in a group buy on
> RS2
> cams. I haven't even done any sort of checking on price. I just want to
> see
> if there is enough interest in this. If so, I may make some inquiries.
> Email
> me off list if you would have interest.
>
> Patrick
>
> _______________________________________________
> 200q20v mailing list
> 200q20v at audifans.com
> http://www.audifans.com/mailman/listinfo/200q20v
>
>
>