Front Anti Sway Bars

[Chuck Pierce]

I looked on the ETKA for the pn#'s on the control arms.
20v 
441 407 151 A
441 407 152 A

V8
441 407 151 C
441 407 152 C
I do not have the wisdom to know the difference.

 I looked at the Tire Rack Tech page. A stiffer front bar will increase 
the understeer. I  would work on a rear sway bar before I stiffened the 
front bar.
Did any one ever figure out if the 92 S4 rear bar would fit or could be 
made to fit?


Chuck Pierce
91 200 tq 20v Avant
Bernie Benz wrote:

>Doc, Please change the subject line to something specific when responding
>from digest mode.
>
>  
>
>>From: "Dr. Adam Gratz" <dradamgratz at hotmail.com>
>>Date: Sun, 18 Jul 2004 13:17:48 -0500
>>To: <200q20v at audifans.com>
>>Subject: RE: 200q20v Digest, Vol 9, Issue 12
>>
>>Sway bar question...
>>
>>I'm replacing the front control arms and can't find any info on upgrades for
>>the front sway bar. None of the performance companies seem to offer
>>anything.
>>    
>>
>The 200-20V front anti sway bar is 26mm, the V8 is 28mm, which would be 35%
>stiffer.  They are interchangeable.  Get the subframe mounting hardware for
>the new bar.
>  
>
>>Does the stock 1990 V8 bar fit? Are the V8 control arms swappable?
>>    
>>
>No BTDT, but I suspect that the V8 and 200 control arms are the same part.
>
>Bernie
>  
>
>>Dr. Gratz
>>
>>
>>
>>
>>_______________________________________________
>>200q20v mailing list
>>200q20v at audifans.com
>>http://www.audifans.com/mailman/listinfo/200q20v
>>    
>>
>
>_______________________________________________
>200q20v mailing list
>200q20v at audifans.com
>http://www.audifans.com/mailman/listinfo/200q20v
>
>  
>