question on 200tq tuning
    Bernie Benz 
    b.benz at charter.net
       
    Thu Jun 24 00:04:28 EDT 2004
    
    
  
Pete,
Obviously, I'm not into K&Ns, but much has been posted here and on the 20V
list about the  deficiencies thereof,  you look it up if interested.
Bernie
From: PeterBergin at aol.com
Date: Wed, 23 Jun 2004 23:27:27 EDT
To: b.benz at charter.net, 200q20v at audifans.com
Subject: Re: question on 200tq tuning
Bernie, if you can give me a link to read about the quality of the K&N I
would appreciate it.  If I am convinced I will remove mine.  Also on the
"Green Gold" thread I cleaned and detailed my motor compartment the other
day and added about an inch of Lucas stop leak to the reservoir.  Going on a
500 mile round trip to work on another toy tomorrow.  I will know of the
leak is still their.  Also I pulled the dash to replace a couple bad
instrument bulbs and tinker with my screwed up check engine display.  I just
followed the steps on one of the sites and found no bad solder joints.
However I cleaned all the connectors and boards with a circuit board cleaner
and everything works again.  My only screw up was I adjusted the speedo
thinking that the allen was a fastener.  But that was a quick fix.
Thanks for the advice.
Pete
91 Avant 
    
    
More information about the 200q20v
mailing list