Wiper/washer system

[David Priebe]

Try clearing the nozzles from the hose side. I had this 
problem on my S6, and pins didn't cut it. There was lots 
of junk inside the nozzles. Also pull the hose off the 
nozzle to see if the washer fluid is even getting out of 
the tank. 
If it is the pump itself, it is a pretty easy fix. Pull 
out the airbox, and then the washer fluid tank itself, 
where the pump is on the bottom.

On Tue, 16 Nov 2004 15:34:59 +0000
  "Mike Del Tergo" <mdeltergo at hotmail.com> wrote:
>question, there a one way valve or similar in system?  I 
>have plenty of fluid, no breaks, can hear pump going but 
>no fluid out the nozzles, I was thinking a failed valve?
>Mike
>


David Priebe
Carnation, WA
91 200tqa 185k (his) FOR SALE !?!?! 
http://www.cablespeed.com/~davidpriebe/200Avant/200TQA.html
95.5 S6 116k (hers)
66 MGB 41k
77 Porsche 911