200 springs

[Bernie Benz]

Mike,
Audi made three different thicknesses of damping rings from 3/8" to 3/4" to
adjust front ride height.  These could be further shimmed if necessary, so
could the rear springs.  Did you tighten the lower control arm to subframe
bolts with the full weight of the car on the suspension?
Bernie 

> From: "Mike Del Tergo" <mdeltergo at hotmail.com>
> Date: Thu, 28 Oct 2004 14:25:33 +0000
> To: 200q20V at audifans.com
> Subject: 200 springs
> 
> After installing some new struts and getting a noticeable list from drivers
> side to pass side (about 1 inch front and rear)  2 separate wrenchs say it
> is the springs.  My choices, as I see it, are set of used stock springs or
> ridehight neutral aftermarket.  So anybody have cheap aftermarket
> alternative or a set of used stock that they want to get rid of?
> thx
> mike
> 
> 
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v