No Boost over 1.0

[Peter Schulz]

Bucking is indicative of a boost leak...and since you are not making over 
1bar (atmospheric pressure), its a BIG leak

Make sure that the bottom of the michelin man hose is actually sealing 
around the intake pipe, I've done this before and had the lower part curl over.
Do the obvious thing of visually checking all the major hoses and making 
sure the clamps are tight.

Check the vacuum hoses around the back of the intake manifold under the ISV


-Peter

At 09:31 AM 9/8/2004, Audi Quattro wrote:
>I recently replaced the MM hose, so thats not the culprit robbing me of my 
>boost.
>Lower hose seems fine
>any other ideas? Car pulls till about 1.0 -1.1 and then start to hickup 
>surging back and forth badly.
>thanks for all your help!
>
>
>---------------------------------
>Do you Yahoo!?
>Yahoo! Mail - Helps protect you from nasty viruses.
>_______________________________________________
>200q20v mailing list    http://www.audifans.com/mailman/listinfo/200q20v

1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1990 CQ silver (awaiting S2 transplant)
1985 4000s Q....black and peeling CC