Brake Bleed Q: four - six
Bernie Benz
b.benz at charter.net
Wed Sep 8 18:25:00 EDT 2004
You all but had the piston out with the caliper in the vice and you didn't
even take a look inside?
I always run my pads until the backing plate rubs the ridges, never a
problem.
Keep guessing and good luck!
Bernie
From: SuffolkD at aol.com
Date: Wed, 8 Sep 2004 17:48:32 EDT
To: b.benz at charter.net
Cc: 200q20v at audifans.com
Subject: Re: Brake Bleed Q: four - six
Bernie: More than one ways to establish a condition.
The piston was so far out, due to the pads GONE down to the backplate, that
the piston cocked at an angle. I could see it when I ratched the E-brake
cam. Looked droopy.
Ever try to push in a bored item that's not aligned straight?
But doing off the vehicle in a vise was like butter....................
-Scott by BOSTON
b.benz at charter.net writes:
Scott, I don't remember your "piston issue" specifics, but if you can't
easily retract, screw in the piston with the" tool" or two screw drivers,
your cali;per is gummed up for sure and needs overhaul.
Bernie
More information about the 200q20v
mailing list