bilstein strut tool
Brandon Rogers
brogers at terrix.com
Tue Sep 14 15:13:21 EDT 2004
what are you talking about?? Maybe you meant to reply WRT to the brake
rebuild thread - regardless - you don't _have_ to read _any_ posts - just
hit DELETE. Or do you have a personal requirement to read every post in
order to reply with your DFI if IAB theory??
Brandon
----- Original Message -----
From: "Bernie Benz" <b.benz at charter.net>
To: <SuffolkD at aol.com>
Cc: "200q20V mailing list" <200q20v at audifans.com>
Sent: Tuesday, September 14, 2004 12:42 PM
Subject: Re: bilstein strut tool
> This thread has had very heavy participation, why? Are you guys all too
> lazy or ascared to remove the strut, such that you could also relube the
> strut tower thrust bearing and the wheel bearing, as well as the two ball
> joints, free up the toe adjustment, and overhaul the calipers, while
> you're in there? Could have had all this done by now.
>
> Bernie
>
> > From: SuffolkD at aol.com
> > Date: Mon, 13 Sep 2004 12:01:19 EDT
> > To: 200q20v at audifans.com, auditude at gmail.com
> > Subject: Re: bilstein strut tool
> >
> > Ken:
> > These Bilstein freaks think we're gonna chase all over for the tool.
> > Why do we use their parts?
> > Anyway...........there is a service center in CT off I-91 around exit 8
or so.
> > I faxed and chased these guys until one showed up.
> >
> > I have two of them (somewhere) but we cut one trying things out.
> > Where you located?
> > -SCott by BOSTON
> >
> >> From: Ken Keith <>
> >> Subject:
> >>
> >> Does anyone know if this tool is supposed to be supplied with front
> >> bilstein struts? I recall having one long ago that was included in
> >> another set, since lost, but my current set doesn't have one in the
> >> boxes.
> >>
> >>
http://us1.webpublications.com.au/static/images/articles/i11/1162_22mg.jpg
> >>
> >> I'd prefer not to use a pipe wrench on the collars. There's a
> >> modified Sears tool described in the next link that can be used, but
> >> I'm wondering if I should have received the tool from Bilstein.
> >>
> >> http://www.elektro.com/~audi/alignment/
> >>
> >> My vendor says I'm supposed to come up with it myself, which seems
> >> pretty crappy. I've left a message with Bilstein to see what they
> >> have to say.
> >> Thanks,
> >> Ken
> >>
> >
> >
> > _______________________________________________
> > 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v
mailing list