Tranny Plug Socket?
Steven Hauptmann
hauptmanns at llr.sc.gov
Mon Sep 20 09:33:27 EDT 2004
Bob,
I used the hex wrench also. I had to give it a good kick to knock it loose.
Seriously, I laid on my back and slid under from the front, feet first and
pushed with my foot.
You could also use a heavy hammer to give it a whack.
Of course if you have the car off the ground you will have the clearance to
use a long pipe.
Steve Hauptmann
South Carolina
-----Original Message-----
From: Bob Reinhardt [mailto:bobh at reinhardtmail.net]
Sent: Sunday, September 19, 2004 8:33 PM
To: 200q20v at audifans.com
Subject: Tranny Plug Socket?
Hey all,
I'm trying to replace the tranny fluid (going to RedLine) in my 1991
200q20v but I'm having a bear of a time trying to get the fill plug
out. I've got a 17mm hex wrench but I just can't get the leverage I
need. Does anyone have a 17mm hex head socket that I could
borrow/rent? I'm wondering if that might do the trick. Other advice
on this operation would be much appreciated. Many thanks!
Cheers,
Bob (in Salem, Oregon)
_______________________________________________
200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
More information about the 200q20v
mailing list