Rebuilding calipers BRAKES

[Bernie Benz]

> From: SuffolkD at aol.com
> 
> Kneale:
> http://www.quattro123.com/200Brakes.htm
> 
> from the link you showed:
> http://20v.org/brakere.htm
> In the exploded view diagram:
> 
> #9 and Lucas kit #10, available at foreign auto part stores.
> german autoparts.com NY or rod at thepartsconnection.com in CA
#9 being the caliper guide pin and #10 the guide pin boot.  The boot is
reuseable unless broken/torn.  The guide pin is replaceable but apparently
not its bushing which is pressed into the caliper support bracket.  Which is
the worn part in this interface?
> 
> #22 and 23, those seals are dealer only AFAIK and were ~$45 when I got them.
What a rip off!  #22 is the piston seal, a square cut O-ring, never IME
needing replacement, a comercial Quad ring would be a better replacement at
about $0.50.  #23 is the piston boot, likewise not needing replacement,
unless broken/torn.

Bernie

> HTH - Scott by BOSTON
>> 
>> From: Kneale Brownson <>
>> 
>> Anyone have a source for the overhaul kit described in:
>> 
>> http://20v.org/brakere.htm
>> 
> 
> 
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v