Error Code 2111

[Dan Cordon]

Eric_R_Kissell at whirlpool.com wrote:

> Is the timing pin still there in the flywheel?
> 
> Eric
> 

I'll have to check that out, along with looking for missing teeth on the 
flywheel gear (thanks Jonas!). The light still comes on and off though, 
so maybe the pin is present, just bent or something?

Searching through the archives, Jeremy P. mentioned when doing the 
breather hose (I did this recently) he moved the coil wire closer to the 
RPM/TDC wires and caused the same intermittent 2111 problem. I'll check 
this out as well.

I'll keep everyone posted-

-- 
Dan Cordon
Mechanical Engineer - Engine Research Facility
University of Idaho



-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.308 / Virus Database: 266.10.3 - Release Date: 4/25/2005