Exchanging front struts
Eric_R_Kissell at whirlpool.com
Eric_R_Kissell at whirlpool.com
Wed Feb 2 08:41:48 EST 2005
Kneale,
I would think you could get creative with some all-thread rod, nuts that
thread onto the threaded rod, pipe that will slide over the threaded rod,
some metal plate that could be bent into a couple of hooks, and a welder.
Or, you could try something from JC Whitney or probably your FLAPS.
Reference:
http://www.jcwhitney.com/autoparts/ProductDisplay/s-10101/p-867/c-10101
I picked up a set of spring compressors cheap sometime in the past. My
father made his own over 20 years ago using the method I suggested above.
I have never removed front springs on this type of car, so I do not know if
my spring compressors would even work. It worked fine on the rear springs.
HTH,
Eric Kissell
Tiffin, OH 44883
1991 200q 20v Avant, Koni Sports (yellow), 2.4 Bar (MRC), eBay Surprise
1989 200q 10v Avant, Boge Turbogas, 1.8 Bar (qlcc) - FOR SALE
1986 5000cstq Sedan, Bilsteins, 1.8 Bar (SJM)
More information about the 200q20v
mailing list