Fule Residue on IM

[Brandon Rogers]

OK I did check the inserts and they were tight.  I was afraid to try any 
hardr for fear of snapping it....

any other ideas?  While I was in there I cleaned it up in case there was 
minor debris...

thanks

Brandon

>
> ----- Original Message ----- 
> From: "Bernie Benz" <b.benz at charter.net>
> To: "Brandon Rogers" <brogers at terrix.com>
> Cc: "200q20V mailing list" <200q20v at audifans.com>
> Sent: Tuesday, January 18, 2005 3:23 PM
> Subject: Re: Fule Residue on IM
>
>
>> Are the plastic inserts that screw into the manifold and into which the
>> O-ring and injector fit, tight?
>>
>> Bernie
>>
>> > From: "Brandon Rogers" <brogers at terrix.com>
>> > Organization: Terrix Financial Corporation
>> > Reply-To: Brandon Rogers <brogers at terrix.com>
>> > Date: Tue, 18 Jan 2005 14:27:41 -0700
>> > To: "200 20V List" <200q20V at audifans.com>
>> > Subject: Fule Residue on IM
>> >
>> > Guys-
>> > I've noticed that some sort of residue, I assume fuel, seems to acrue 
>> > on
> my
>> > intake manifold where the injectors snap in.  It only happens on 3 and
> 4.  I
>> > have replaced all the o-rings that come with an injector rebuild kit,
> but I
>> > still get the residue.  Anybody else get this?  Thoughts?
>> >
>> > Thanks-
>> >
>> > Brandon
>> > _______________________________________________
>> > 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v
>