Fule Residue on IM

[Chuck Pierce]

Brandon
If I remember correctly they use a 10mm allen to tighten and remember 
they are plastic and will crack very easily or have pieces break off, if 
you ae not careful.
BTDT.
Chuck Pierce
91 200tq Avant

Brandon Rogers wrote:

>hmm, well, now I'm not feeling too smart.....I'll have to check that.
>thanks.
>
>Brandon
>
>----- Original Message ----- 
>From: "Bernie Benz" <b.benz at charter.net>
>To: "Brandon Rogers" <brogers at terrix.com>
>Cc: "200q20V mailing list" <200q20v at audifans.com>
>Sent: Tuesday, January 18, 2005 3:23 PM
>Subject: Re: Fule Residue on IM
>
>
>  
>
>>Are the plastic inserts that screw into the manifold and into which the
>>O-ring and injector fit, tight?
>>
>>Bernie
>>
>>    
>>
>>>From: "Brandon Rogers" <brogers at terrix.com>
>>>Organization: Terrix Financial Corporation
>>>Reply-To: Brandon Rogers <brogers at terrix.com>
>>>Date: Tue, 18 Jan 2005 14:27:41 -0700
>>>To: "200 20V List" <200q20V at audifans.com>
>>>Subject: Fule Residue on IM
>>>
>>>Guys-
>>>I've noticed that some sort of residue, I assume fuel, seems to acrue on
>>>      
>>>
>my
>  
>
>>>intake manifold where the injectors snap in.  It only happens on 3 and
>>>      
>>>
>4.  I
>  
>
>>>have replaced all the o-rings that come with an injector rebuild kit,
>>>      
>>>
>but I
>  
>
>>>still get the residue.  Anybody else get this?  Thoughts?
>>>
>>>Thanks-
>>>
>>>Brandon
>>>_______________________________________________
>>>200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v
>>>      
>>>
>
>_______________________________________________
>200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v
>
>  
>