91 200q20v, c-arm bushing replacement

[Bernie Benz]

Just tends to show how an inconcise Q post misleads.  I assumed that he was
talking of the sway bar end bushings, but it deserved no response until
clarified.

Bernie

> From: "Ingo Rautenberg" <irautenberg at comcast.net>
> 
> Bob,
> 
> Not exactly sure what you're saying.  In any case, if you are plnning on
> replacing the inner control arm bushing, you might find it easier and more
> worthwhile to replace the whole control arm --as it comes with the bushing
> already installed-- plus the ball joint, which can not be purchased
> separately and which is likely on its way out.  You can buy the complete
> control arm for ~$100-150 from most parts places (but make sure you get the
> one with the 19mm balljoint).  As to the sway bar bushing -- if you mean the
> inner ones in front of the motor --  IME, this is a dealer-only part.
> 
> Ingo
> 
> ----- Original Message -----
> From: <Rbade12 at aol.com>
> To: <200q20v at audifans.com>
> Sent: Friday, May 06, 2005 10:40 AM
> Subject: 91 200q20v, c-arm bushing replacement
> 
> 
>> I'm planning on replacing my front c-arm bushing. I was wondering if you
>> folks had any tips/advice. Is there an aftermarket sway bar bushing
> available or
>> should I stick to OE?
>> Thank you!    Bob
>> _______________________________________________
>> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>> 
>> 
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Anti-Virus.
>> Version: 7.0.308 / Virus Database: 266.11.5 - Release Date: 5/4/2005
>> 
>> 
> 
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v