Pro Con Ten-fusion

[Peter Schulz]

Kneale:

this may help:
http://www.motorgeek.com/phpBB2/viewtopic.php?t=11301#136098



-Peter

At 03:30 PM 8/15/2006, Kneale Brownson wrote:
>I remain inexperienced and confused....What does one do with the ProConTen
>cables when extracting the transmission?
>
>1.  Do I unbolt the bracket attached to the body?
>
>2.   Or do I somehow loop cables off the invisible connection to the tranny
>somehow?
>
>I finally have all the hidden bolts out of the connection between the
>tranny and  engine castings.  I can slide the tranny about a quarter inch
>back.  Looks like the cables tighten then.  That's as much as I've been
>able to figure out.  Bentley directions led me to think there is a bracket
>attached to the tranny, but now I'm thinking it's the one attached to the
>passenger side of the driveline tunnel that gets detached.
>_______________________________________________
>200q20v mailing list    http://www.audifans.com/mailman/listinfo/200q20v

-Peter Schulz
Chelmsford Ma, USA
http://www.naaclub.org/

1991 200 20v Q Avant Titan Grey
1991 200 20v Q Avant Indigo Mica
1991 90 20v Q Red

1990 CQ silver (awaiting S2 engine transplant)
1991 CQ silver  (potentially replacing the 1990 for  the transplant)
1990 CQ red ( to part or not)