Anyone have a used 3b chipped ecu, or 20vt eproms for a reasonable price?

[alan cordeiro]

Consider requesting engineering samples from Motorola on the 3 bar PT,
The days of plentiful free samples are long gone, but occasionally
the reps will spring for one or two, or allow you to "buy" a couple
of samples at a reasonable price

----- Original Message ----- 
From: "Ben Swann" <benswann at comcast.net>
To: "Patrick Anderson" <patrick.anderson1 at comcast.net>;
<Eric_R_Kissell at whirlpool.com>
Cc: <200q20V at audifans.com>
Sent: Tuesday, January 10, 2006 1:06 AM
Subject: Re: Anyone have a used 3b chipped ecu,or 20vt eproms for a
reasonable price?


> Does the VMAP actually contain two pressure transducers that are switched
> independantly, or a 2.5 with a resistor Mod to fake to 3Bar or vice
versa -
> truncate the read of the 3 bar when it goes to 2.5 or 2 Bar.  Ineither
case,
> I consider the VMAP to be rather pricy for what it does, but perhaps I
need
> some education on how it works specifically and don't have the full story.
>
> I can get the 3 bar Motorola P.T.s, but last I checked I had to buy in a
> quantity that required large cash outlay due to a large minimum number,
when
> all I needed was one.  Maybe if there is interest, I can put something
> together GP wise. I suspect however most of our cars are not prepped to
take
> 3Bar.
>
> Ben
> ----- Original Message ----- 
> From: "Patrick Anderson" <patrick.anderson1 at comcast.net>
> To: "Ben Swann" <benswann at comcast.net>; <Eric_R_Kissell at whirlpool.com>
> Cc: <200q20V at audifans.com>
> Sent: Tuesday, January 10, 2006 12:30 AM
> Subject: Re: Anyone have a used 3b chipped ecu,or 20vt eproms for a
> reasonable price?
>
>
> > From what I hear they are getting pretty damn unobtainable. MTM just
> > bought the last bunch in existence at Bosch...about 300 from what I am
> > told. Your best bet may be the Vmap solution. Alex at Intended
> > Acceleration just got a new batch of those in.
>
> > ----- Original Message ----- 
> > From: "Ben Swann" <benswann at comcast.net>
> > To: <Eric_R_Kissell at whirlpool.com>
> > Cc: <200q20V at audifans.com>
> > Sent: Monday, January 09, 2006 1:09 PM
> > Subject: Re: Anyone have a used 3b chipped ecu,or 20vt eproms for a
> > reasonable price?
> >
> >
> >> Eric,
> >>
> >> As you recall, I helped Mihnea with his Group Purchase awhile back, but
> >> currently offer a different chipset along with a 2.5 bar pressure
> >> transducer and complete installation instructions.  Both chipsets are
> >> good.  I am running the set I offer in both my 200Q20Vs.
> >>
> >> I offer this in a similar fashion as the DIY QLCC kit.
> >>
> >> Thanks for the good word.
> >>
> >> BTW anyone know a good source for 3 Bar Pressure Transducers that don't
> >> cost an arm, leg or first born?
> >>
> >> Ben
> >> ----- Original Message ----- 
> >> From: <Eric_R_Kissell at whirlpool.com>
> >> To: "Ben Swann" <benswann at comcast.net>
> >> Cc: <200q20V at audifans.com>; <alancordeiro at comcast.net>
> >> Sent: Monday, January 09, 2006 3:46 PM
> >> Subject: Re: Anyone have a used 3b chipped ecu, or 20vt eproms for a
> >> reasonable price?
> >>
> >>
> >>>
> >>> Ben Swann - You offer Mihnea's (MRC) chips, right?
> >>>
> >>> Eric (Satisfied customer with MRC chip & Ben Swann modified 2.5 Bar
PT)
> >>
> >> _______________________________________________
> >> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
> >
>
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v