Rear brake valve (91 200 20V Avant)

[John S. Lagnese]

The line in from the MC is able to be loosened? If so, cut the line to the
paeenger side and replace both. If one side is done the other can't be too
far behind.
John
----- Original Message ----- 
From: "Audi Quattro" <libenaudi at yahoo.com>
To: "QUATTRO LIST" <200q20v at audifans.com>
Sent: Sunday, January 22, 2006 1:00 PM
Subject: Rear brake valve (91 200 20V Avant)


> Had the metal brake line hose pop (rusted through) near the drivers side
rear tire.
>   One piece comes from a union, and the other goes into the rear
(proportioning valve? # 443.614.151 E  (dont have ETKA handy) I cannot get
the line unscrewed from this valve. Valve has only two connections, one on
the pass side and one toward the drivers side. Its the end, thats on the
passenger side that is rusted stuck. tried soaking in penetrating fluid, and
still nothing. How can i remove this proportioning vavle so I can bench it
and unscrew line? doesnt really look like it removes easily.
>   any ideas?
>
>   thanks!
>   -Leszek
>
>
>
> ---------------------------------
> Yahoo! Photos
>  Ring in the New Year with Photo Calendars. Add photos, events, holidays,
whatever.
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v