Strut Bar Type 44

[Chuck Pierce]

Sorry Bernie

It should have been " Strut TOWER Bar " I know better.

With a combination of the Igor mod and slotting the holes the car owner 
will gain more adjustment.

I am just not into chrome, bling is not my thing.

The way we built the bar it will help and it is not bent.

Chuck


Bernie Benz wrote:

>Chuck, 
>I still resent your missrepresenting your "attachment" as a Strut Bar when
>in fact it is no more than a bent tower brace. More below.
>
>  
>
>>From: Chuck Pierce 
>>Hi Guys
>>    
>>
>
><snip>
>
>  
>
>>I basically was the idea person and helped in the initial construction
>>for the right look and position.
>>( It had to be cute Bernie)
>>    
>>
>If cute is all it has going for it, chrome plate it or fluorescent orange
>even better. 
>  
>
>>Also if you need to get more camber adjustment if you have lowered your
>>cars, we built a jig to do the Igor Kissel mod to the strut plates.
>>
>>http://www.elektro.com/~audi/alignment/
>>
>>This mod give 4 mm more adjustment. Igor mod was for the URS6 cars but
>>it will work on ours.
>>If you do this and grind the strut bushing slots you can come with a
>>decent additional amount of adjustment.
>>    
>>
>In repeated clarification, the Igor mod and slotting the strut mounting
>holes in the tower are mutually exclusive!
>
>Bernie 
>
>  
>