No subject

has the strength to push the clutch open, there will be no
werar until the throwout bearing goes bad again. So you 
probably have ten years there at least.

With a brand new clutch, you will need less force to open it
for a few years, unless you also upgraded it to a stronger
clutch....

Alan


----- Original Message ----- 
From: "Kneale Brownson" <kneale at coslink.net>
To: <200q20v at audifans.com>
Cc: <v8 at audifans.com>
Sent: Monday, August 28, 2006 4:35 PM
Subject: Clutch lever NLA


> The dealer source I use for dealer-only parts (Sunset in Oregon) reports
> the clutch spring operating lever is obsolete and no longer available.
> That's part #  016 141 719A.    Mine's chewed up from the destruction of
> the throwout bearing so that I'm reluctant to reuse it.
> http://www.pbase.com/kneale_brownson/image/65750373
> 
> That's the same part number used in the V8s with clutches.
> 
> Any suggestions for work-arounds?
> _______________________________________________
> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>