Passenger rear control arm bushing pn anyone?

[Peter Schulz]

Thanks Kneale...
At 12:02 PM 6/5/2006, Kneale Brownson wrote:
>If you're talking about the front bushing on the "trailing arm"  often
>fondly referred to as the trapezoid arm, it's the same as the bushing on
>the outer rear of that arm (Item 11 in ETKA, Illustration  45-00):  4D0 511
>523C.  That support at the front (three bolts, including the one that goes
>into the front of the trapezoid arm) is a separate piece the bushing 
>goes into.

Not sure about that....
entering that part number results in this...
http://catalog.eautopartscatalog.com/sjm/022805/quote.jsp?header=header.jsp&footer=&product=4D0511523C&partner=sjm&baseurl=http://www.sjmauto.com/&clientid=sjm&cookieid=1P90XUDKI1TI0QHJPP

but then the separate three bolt bushing on the front seems to require this:
http://catalog.eautopartscatalog.com/sjm/022805/wizard.jsp?partner=sjm&clientid=sjm&baseurl=http://www.sjmauto.com/&cookieid=1P90XUDKI1TI0Q9O1Z&year=1991&make=AU&model=200-QT-002&category=L&part=Control+Arm+Bushing

Just wanted to be sure AND have the audi pn for that bushing....


-Peter


>If you're talking about the "track control arm", that is ball joints at the
>ends with integral bushings.
>
>
>At 11:14 AM 6/5/2006 -0400, Peter Schulz wrote:
> >need the part number for the rear control arm (passenger side)
> >forward bushing (housing is removable 3bolt)
> >
> >Family album pictures seem a bit vague...
> >
> >thanks
> >
> >
> >-Peter Schulz
> >Chelmsford Ma, USA
> >http://www.naaclub.org/
> >
> >1991 200 20v Q Avant Titan Grey
> >1991 200 20v Q Avant Indigo Mica
> >1991 90 20v Q Red
> >
> >1990 CQ silver (awaiting S2 engine transplant)
> >1991 CQ silver  (potentially replacing the 1990 for  the transplant)
> >1990 CQ red ( to part or not)
> >
> >_______________________________________________
> >200q20v mailing list   http://www.audifans.com/mailman/listinfo/200q20v