Oil catch can? PICTURES

[J Sweet]

Questioning the smoke on decel after this installation. Why would it show
now rather than before? Possible the catch can is not allowing enough flow
through the inlet/outlet orifices?

-Jerome 

-----Original Message-----
From: Bernie Benz [mailto:b.benz at charter.net] 
Sent: Sunday, October 08, 2006 9:00 PM
To: J Sweet
Subject: Re: Oil catch can? PICTURES

So, what¹s the diff, and your point?

> From: "J Sweet" <jsweet at ml1.net>
> Date: Sun, 8 Oct 2006 16:05:43 -0700
> To: <200q20v at audifans.com>
> Subject: FW: Oil catch can?  PICTURES
> 
> 
> Here they are:
> 
> http://www.parisautoworks.com/random/stock.jpg     <---- stock hose
routing
> 
> http://www.parisautoworks.com/random/can.jpg   <----- catch can routing
> 
> -Jerome
> 
> _____
> 
> From: J Sweet [mailto:jsweet at ml1.net]
> Sent: Sunday, October 08, 2006 3:45 PM
> To: '200q20v at audifans.com'
> Subject: Oil catch can?
> 
> 
> Hey guys, I just installed an oil catch can on the 20v for various
reasons.
> Now, I notice on decel it will smoke. This happens ONLY after boosting 
> (ie, 2nd gear punch it to 5000 rpm or so, then decel). If I drive to 4 
> or 5k without boost then decel it wont do it. Im confused on what 
> changed besides the can in-line. I did change the size of the breather 
> hose but I doubt that would cause this. Any ideas? Im leaning for a 
> new turbo.. Ill post a diagram of how I routed it.
> 
> -Jerome
> _______________________________________________
> 200q20v mailing list  http://www.audifans.com/mailman/listinfo/200q20v