Oil cooler upgrade - any BTDT?

[Rich Letsinger]

Patrick,

I'm running a Setrab cooler with AN-12 lines.  You'll want to use -12,
as -10 becomes a restriction to flow.  I have the part# for the
adapter you'll need to get to -12 coming off the thermostat housing. I
found Ebay has some great deals on lightly used coolers, check that
out.  Mine's mounted on my urq where your intercooler is.  My oil
temps come up a little and then never budge on the street, I think
once the thermostat opens the cooler is more than sufficient.  On
track I do see it come up some when I'm going hard, but it's right
back at the normal spot by the end of a cool-down lap.

Rich

On 10/16/06, Patrick Anderson <patrick.anderson1 at comcast.net> wrote:
> Searched the archives but didn't find much. I'm starting the process of upgrading my stock intercooler to a bigger and more efficient unit. I'm thinking about using a Mocal 16 or 19 row cooler. Has anybody already been down this road? Got a list of parts you used?
>
> Thanks,
> Patrick
> _______________________________________________
> 200q20v mailing list     http://www.audifans.com/mailman/listinfo/200q20v
>