K-24 turbo differences

[Bernie Benz]

You can orient the compressor housing, or the turbine housing to any  
angle that you wish relative to the bearing housing. While it is off,  
you can easily tap the aluminum compressor housing.

Bernie


On Jun 4, 2007, at 1:56 PM, Rbade12 at aol.com wrote:

> I recently acquired a K-24 turbo. I thought all K-24's were the  
> same.  As
> many, if not most, of you know they aren't. The difference between  
> the one I
> acquired and the one presently on the car appear to be with the  
> cold side only.
> Mine has an adapter for the wastegate frequency valve, the acquired  
> version
> does  not, my present ouput is oriented what appears to be 90 degrees
> counter-clockwise from the one I acquired. So, my questions are,  
> can I tap the  cold
> side for the WFV adapter [there is a flat spot in the proper   
> location] and can
> I rotate the cold side 90 degrees so it's aimed  correctly? Does  
> anyone have
> knowledge of differences I can't see, or any other  info? Thanks, Bob
>
>
>
> ************************************** See what's free at http:// 
> www.aol.com.
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v