rear brakes 200q20v Digest, Vol 43, Issue 8

[Brett Dikeman]

On May 10, 2007, at 8:59 AM, SuffolkD at aol.com wrote:

> Most trouble I encounter is getting the new pads past the rotor  
> outer edges;
> ever so slight "lip" from pad wear.

Peter Schulz clued me in on what to do here with the rust that forms  
on the inside+outside edges of the rotor: carbide scraper tool from  
Home Despot or similar.

Cuts through the stuff like a knife through butter.

Brett