no heat, help please

[Chuck Pierce]

If it is the flap position motor/pot. try cranking the heat way up on the controller.
That will put the motor and position pot. in a different position and the heat may work.
If this gives you heat, you will need to replace it. Easy job BTDT
Chuck Pierce

-----Original Message-----
>From: Tom Egbert <tomegbert1323 at yahoo.com>
>Sent: Oct 31, 2007 2:47 PM
>To: list audi <200q20v at audifans.com>
>Subject: no heat, help please
>
>  A/C system still works normally but no heat in the chilly morns. No codes from the A/C control head. 
>     Can I  manually apply vacuum to the heater control valve and eliminate some possibilities?
>                                               TIA,Tom
>_______________________________________________
>200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v