MAC-14 Diagnostics

[suffolkd at aol.com]

 The earliest EU I could read was a 200 20V 3B.? AFAIK the MAc -14 is for a MC-2
BAck when Vag Com came out i asked if it could read a 1990 200 10V (Mac - 14) we never tested it.
VAg-Com site listed the 3B as the earliest to "work" a few years ago.? I don't know if that has changed.....


try http://www.sjmautotechnik.com/trouble_shooting/pinout.html#fourtp

other searchs just brings up some of your posts :-)
-Scott by BOSTON
From: "Ben Swann" <>


I?m trying to run codes on my MAC-14 ECU which is currently setup to do only 
ignition
for my Megasquirt setup.  The wiring harness has been completely transplanted, 
and I
installed connectors for the ?dirty? OBD to connect to VAG-COM.  VAG-COM is not 
picking
up on it.

Has anyone retrieved codes via VAG-COM for the MAC-14?

I will try connecting to flash the codes, but would be nice to use the OBD 
features.
Anyone had much success flashing the codes using fuse and CEL?  I don?t have 
identical
wiring with Fuel Pump Relay, but have wired according to Bentley.  Wondering if 
I am
missing anything for this.

Ben



 


________________________________________________________________________
Email and AIM finally together. You've gotta check out free AOL Mail! - http://mail.aol.com