slotting the strut towers

[Chuck Pierce]

Robert 
Attached is an Article on modification of the spring plates. Read Pt III
I do not know if I would slot the towers.
I would build Bernie's strut brace first. 
Does your car have the bending sheet metal from the towers coming in a bit?

Chuck Pierce
91 200 20v Avant

-----Original Message-----
>From: robert weinberg <centaurus3200 at yahoo.com>
>Sent: Aug 1, 2008 10:13 AM
>To: 200q20V mailing list <200q20v at audifans.com>
>Subject: slotting the strut towers
>
>hi all,
>
>UPS finally found the koni/H&R combo i bought from chris at force5. what an ordeal - lost in indiana.
>
>anyway, i'm going to drop the car off at my friend's shop this sunday. does anybody have a decent write-up on the procedure to slot the strut towers?
>
>from my research, it seems if i did nothing, the H&R combo would run about -1.5 degree camber even with the struts adjusted to the max. not god awful, but -1 or less would be better.
>
>the 200q is not my daily driver, so when i do hop in the driver's seat, it will be for something fun, like carving up highway 1 ;-)
>
>see ya,
>Robby
>
>
>      
>_______________________________________________
>200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v