S4/S6 exhaust on a '91 200?

[Austin Calise]

Phil, there's a few differences 1 the rear tips position for the cut out on the rear bumper. The 200 20v tips would need to be welded to the s-car rear box. 2 the cat's are different 1 being the the flanges to DP are 3 bolt vs the 200's 4 bolt flanges, 2 being they are a different shape and the pipes flare out to met the DP( S-car DP outlets are further apart than on the 200 20v DP about 17"ish 200 and 22"ish on the S-car) . Other than that the mid and rear sections are pretty much the same. I have a V8 rear section along with two round resonators on my 200 20v and I cut the 200 20v tips off and welded them to the rear box.

           HTH's Austin