coil on plug?

[Claus Vegener]

Yes I had to change the internal return water hole above the thermostat in 
the block.
It is round at the WR but bigger oval in the head so material had to be 
added to the block to cover.
The cambelt were too close to the head so the lower tooth wheel had to be 
moved outward some mm
by turning the balancer in a lathe - and the 83 WR don't have crankcase 
ventilation at the block
so that have been added to the valve cover. (learned the hard way)
The 034EFI IIc have drivers strong enough for the coils in the AAN 
valvecover, so separate high output coils is not a must.

----- Original Message ----- 
From: "Brandon Rogers" <brogers at terrix.com>
To: "'Claus Vegener'" <vegener at post7.tele.dk>; <200q20v at audifans.com>
Sent: Tuesday, February 12, 2008 6:54 PM
Subject: Re: coil on plug?


> Interesting route - thanks Claus.  I assume the 3B head on WR block took
> some customizing somehow or another...
>
> I have a stock 3B in my '84 ur-quattro - except it has the RS2 EM and
> turbo and software.  I'm in the early stages of planning a conversion to
> coil on plug using (most likely) 034 high output coils, black crinkle
> finish 7A valve cover (already installed) and use the dizzy as a CPS,
> convert to AAN ECU, add some wiring and swap pin terminals in the
> connector so it is correct for the AAN ECU, different FPR (4Bar), RS2
> injectors...
>
> Just curious if others had done a similar conversion and get their
> feedback.  Motive is of course more power for my toy car.
>
> Brandon
>
> -----Original Message-----
> From: Claus Vegener [mailto:vegener at post7.tele.dk]
> Sent: Tuesday, February 12, 2008 1:34 AM
> To: Brandon Rogers; 200q20v at audifans.com
> Subject: *****SPAM***** Re: coil on plug?
>
>
> Yes
> Using 034EFI IIc and the 60-2 front wheel with a Hall device and a AAN
> valvecover.
> The 3B head is mounted on my original WR block in my Ur-quattro. Produce
> 531 Hp with wasted spark because I didn't get the cam sensor to work
> and have eliminated the distributor (and what a luck - now the gear have
>
> broken off the cam)
> Claus
> 83 ur-quattro w/ WR-3B and 034EFI
> ----- Original Message ----- 
> From: "Brandon Rogers" <brogers at terrix.com>
> To: <200q20v at audifans.com>
> Sent: Monday, February 11, 2008 11:17 PM
> Subject: coil on plug?
>
>
>> Anybody here converted their 3B to coil on plug ignition?
>>
>> Brandon
>> '84 ur-quattro w/ 3B
>>
>> _______________________________________________
>> 200q20v mailing list http://www.audifans.com/mailman/listinfo/200q20v
>>
>