91 200 trans seal

[Austin Calise]

Not spring loaded. Ok if your certain it's
the axle flange seal........To remove the axle flange
run a CV bolt in with a chisel behind the flange
and it will pop out.(may have do this twice 180
of the first bolt.) To remove the seal a pry bar 
or screw driver will work just be careful not to mar
the machined surfaces. I've heard of using Curil T
sealant to make sure cam style seals don't leak.
http://www.pelicanparts.com/catalog/shopcart/9144/POR_9144_ENGmis_pg1.htm
HTH's Austin


       
---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.