hall sender

[Bernie Benz]

The Hall sender is in the distributor. I have the Bosch part number  
for it. added below:

3B = Bosch 1 230 329 049. The 3B and 7A use the same part. These  
distributors are interchangeable.
Rotors are different. 3B = Bosch 1 234 332 414 R1, 7A = Bosch 1 234  
332 301 R1.
The 301 rotor can be converted into a 414 by trimming the side ears  
to 0.435” width.

Bernie


On Jun 24, 2008, at 12:25 PM, Jean-François Roldan wrote:

>
> I am experiencing some problems with sensors...
>
> I am driving and all of a sudden, RPM dies, only thing I can do is  
> coast to a stop. After that, no start until the thing cools down.
>
> Start again after a few minutes, same thing happens a few minutes  
> later...
>
> Research pointed to ignition reference sender, engine speed sensor  
> and hall sender. I am tempted to replace all 3 as this problem  
> really pisses me off as it is intermittent. Some days are trouble  
> free, others are hell.
>
> I was able to track down the first two sensors, but nothing on the  
> hall sender. Is it the same model as the 92 S4?  I can't find it at  
> autohausaz or SJM.
>
> thanks
>
> JF
> 199 200 tqa
>
> _________________________________________________________________
>
> _______________________________________________
> 200q20v mailing list	 http://www.audifans.com/mailman/listinfo/200q20v