Hazet Tool

[CLAG500 at aol.com]

I always use a hex bit on a torque wrench to turn the shaft and hold the nut 
with a 22mm box end wrench.
 
In a message dated 3/27/2008 2:00:28 PM Eastern Standard Time, 
200q20v-request at audifans.com writes:

Date: Wed, 26 Mar 2008 15:25:36 EDT
From: TooManyAudis at aol.com
Subject: Hazet Tool
To: 200q20v at audifans.com
Message-ID: <bff.33382600.351bfd30 at aol.com>
Content-Type: text/plain; charset="US-ASCII"

the O2 Sensor tool is free courtesy of the loaner  program at autozone.

-- Tom


In a message dated 3/26/2008 3:00:36 P.M. Eastern Daylight Time,  
200q20v-request at audifans.com writes:

Message:  2
Date: Tue, 25 Mar 2008 16:43:51 -0400
From: Phil Rose  <pjrose at frontiernet.net>
Subject: Re: Hazet tool # 2593-22
To:  Rbade12 at aol.com
Cc: adamgratz at gmail.com,  200q20v at audifans.com
Message-ID:  <a06240802c40f12f87d09@[192.168.0.101]>
Content-Type: text/plain;  charset="us-ascii" ; format="flowed"

I don't believe anyone has yet  mentioned using the 22mm "Offset 
Oxygen Sensor Wrench" (Performance Tool  #W84008). It is a 3/8" drive 
and permits use with Torque wrench --AND also  inserting an Allen 
wrench. I believe I bought mine at Pep Boys (I don't  recall price but 
expect something like  $10-15).

Phil





**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)