Stongard source?

Phil and Judy Rose pjrose at frontiernet.net
Thu Nov 20 07:22:39 PST 2008


At 10:07 PM -0700 11/19/08, Kenneth Keith wrote:
>I believe the stuff to do the headlights, like the precut Stongard I have on
>my other eurolights, is much thicker than the stuff they use for hoods.
>I'll check it out though.  Thanks for the heads ups.

Yes, much, much thicker. The thinner stuff would likely reduce the 
extent of lens pitting, but not help much in regard to breakage 
(large stones, etc.)

There's been much discussion about the fact that for the '91 200 euro 
lens the Stongard design is/was inadequate to cover the entire lens 
surface--they leave the perimeter (approx. 3/8 inch wide) vulnerable 
to breakage. This fact has been brought to their attention, but I'm 
not aware if they've ever acted on the information (or if they even 
cared). Fortunately my euro lenses have survived for 50+ kmiles-- 
without damage (knock on Zebrano)--under Stongard protection.

Phil
-- 
*********************************
*  Phil & Judy Rose           Rochester, NY  *      
*        mailto:pjrose at frontiernet.net       *
*********************************			        
	      		      
	                                                


More information about the 200q20v mailing list